How to make a homebrew monster

The short answerDescribe your monster to the Archivist Inquiry Assistant and approve what it suggests, or copy the closest monster and paste your text over it by hand. You get a full stat block with its Challenge, XP and rollable attacks, ready for your campaign page.

  • For DMs
  • 15 short steps
  • Updated 7 November 2026, for Archivist 1.4.0

This page's example is the Brine Ghast from the Drowned Coast, Archivist's own sample homebrew.

Make it with the Archivist Inquiry Assistant

  • Press the owl at the right edge of the screen to open the Archivist Inquiry Assistant. On a phone, press the owl beside search.
  • Describe your monster in a sentence.
  • Check what it suggests and press Approve. Your monster is in your Compendium ready for your campaign page and your notes.
For exampleMake a monster called the Brine Ghast: Armor Class 13, 45 hit points, a Swim Speed of 30 feet, and claws that deal an extra 1d6 Cold damage.

You can undo it. Can't see the owl? Turn on Archivist Inquiry Assistant in Settings.

The Compendium's Monsters list with the Archivist Inquiry Assistant open over its right side. The box at the bottom holds the request for a monster called the Brine Ghast: Armor Class 13, 45 hit points, a Swim Speed of 30 feet, and claws that deal an extra 1d6 Cold damage.

It may ask you something first. Pick an answer and press Send.

The Archivist Inquiry Assistant at work on the request. Its lines say it searched the Compendium for Brine Ghast and found none, and it has a question: what Challenge Rating it should be. Challenge 2, a tough early fight is picked and sent, and the next line says it is drafting the entry.

It shows what it adds. Nothing changes until you press Approve.

The Archivist Inquiry Assistant's suggestion: Brine Ghast, an undead with its hit points, speeds and claws, with an Approve button.

Your new monster is in the Compendium.

The Compendium's Monsters list showing Brine Ghast from Homebrew, and its block: an undead with Armor Class 13, 36 hit points, walk and swim 30 feet, and its claws.

The Compendium's Monsters list: Brine Ghast from Homebrew.

The Compendium's Monsters list: Brine Ghast from Homebrew.

Change an existing one with the Archivist Inquiry Assistant

  • Open the Compendium, or a sheet that uses the monster, and press the owl.
  • Say which monster and what to change.
  • Check what it suggests and press Approve. Characters who use the monster change with it.
For exampleRaise my Brine Ghast's hit points to 60.

You can undo it.

The Archivist Inquiry Assistant's suggestion to change it, ready to approve.
Its suggestion, ready to approve.

Do it by hand: copy the monster closest to your idea

  1. In the top bar, press Compendium.
  2. In the list on the left, press Monsters.
  3. In the search box, type a monster closest to your idea. Here it is Ghast.
  4. Press it in the list. When two rows match, pick the one with the rules you play by.
  5. Press Copy to my compendium.
The Compendium's Monsters list searched for Ghast. Rings mark Compendium, Monsters, the search box, the Ghast row and the Copy to my compendium button.
Rings 1 to 5 match steps 1 to 5.
  1. Under To, press Homebrew. Every account starts with this compendium.
  2. Press Copy.
The Move or copy Ghast window on Copy. Under To, the Homebrew compendium is picked and ringed, and a second ring marks the Copy button.
The built-in rules stay as they are. You work on your own copy.

Change it into your monster

  1. In the list, press your copy: the Ghast with Homebrew under Source.
  2. Above its card, press the ⋯ button.
  3. Press Edit.
The Monsters list with the Ghast from the Homebrew compendium ringed. The three dots button above its card is ringed and its menu is open, with Edit ringed.
Your own entries get this menu.
  1. Press in the Text box, select all of its text (Ctrl+A, or Cmd+A on a Mac), then paste these lines. Change the words to make it yours:
    The Brine Ghast
    name: Brine Ghast
    edition: '2024'
    source: Homebrew
    size: medium
    type: undead
    alignment: neutral evil
    ac:
      - ac: 13
    hp:
      average: 36
      formula: 8d8
    speed:
      walk: 30
      swim: 30
    abilities:
      str: 14
      dex: 14
      con: 12
      int: 8
      wis: 10
      cha: 9
    saves:
      con: 3
    senses:
      - darkvision 60 ft.
    languages:
      - Common
    damage_resistances:
      - cold
    damage_immunities:
      - poison
    condition_immunities:
      - exhaustion
      - poisoned
    cr: '2'
    passive_perception: 10
    traits:
      - name: Amphibious
        entries:
          - The ghast can breathe air and water.
    actions:
      - name: Multiattack
        entries:
          - The ghast makes two Claw attacks.
      - name: Claw
        entries:
          - 'Melee Attack Roll: `atk:STR+PB`, reach 5 ft. Hit: `dmg:1d8+STR` Slashing damage plus `dmg:1d6` Cold damage.'
        attacks:
          - name: Claw attack
            type: melee
            bonus: 4
            damage: 1d8+2
            damage_type: slashing
            range:
              reach: 5
  2. Press Save.

The Preview beside the text draws the monster again as you type. On a phone, Text and Preview are two tabs. Keep the spaces at the start of each line.

The Edit window with the Brine Ghast's lines in the Text box, ringed, and the Preview drawing its stat block. A second ring marks Save.
The Preview draws the whole stat block.

Roll from it

  1. On its stat block, press Actions.
  2. Press a to-hit or a damage roll to roll it.
The Brine Ghast's stat block in the Compendium: Armor Class 13, 36 hit points, Walk 30 and Swim 30, Challenge 2, 450 XP. The Actions tab is ringed, showing Multiattack and Claw with +4 to hit and 1d8+2 Slashing plus 1d6 Cold.
The to-hit and damage come from its scores: atk:STR+PB and dmg:1d8+STR.
  1. To have it at the table, open your campaign's ⋯ menu and choose Arrange, press Add and type its name. Use the DM's dashboard shows each step.

The lines you will use most in a monster

The Compendium format guide lists every kind of entry.

LineWhat it doesWhat you can write
size, type, alignmentThe line under its name.medium, undead, neutral evil
ac, hpArmor Class and Hit Points, with a rollable formula.- ac: 13, average: 36, formula: 8d8
speedWalk, swim, fly, climb, burrow.walk: 30, swim: 30
abilities, savesThe six scores and any save bonuses.str: 14, con: 3
senses, languagesTheir lines on the block.- darkvision 60 ft., - Common
damage_resistances, damage_immunities, condition_immunitiesTheir lines on the block.- cold, - poison, - poisoned
crChallenge, XP and Proficiency Bonus.cr: '2'
traits, actionsThe tabs on the block. Each has a name and entries.atk:STR+PB and dmg:1d8+STR roll when pressed

Questions

Save does nothing. What now?

Save waits until the text can be read, and a line over the Preview says what to fix, such as "Line 12 can't be read. Check its spacing and colons." Put the spaces back at the start of that line. If a sentence has a colon in it, put the whole sentence in double quotes.

How do my players get my monster?

Press Manage compendiums, then Export beside your compendium, and send them the zip file. They press Import homebrew, choose Archivist files and drop it in. Share homebrew with your party shows each step.

Will I see it on my phone?

Yes. Your homebrew stays in sync on every device you sign in on, along with your characters and their portraits.

Keep going